Product Specifications
Core parameters
Product lifespan
5 years
battery quantity
Number of batteries: 3 <45S (The time interval from the issuance of the task to the full deployment of the drone) <85S (Shen Chi unloading + loading)
task response time
Radius: 20km (Outdoor open space, undisturbed environment) Temperature: -20°C~50°C Humidity: <95%RH Convenient installation and maintenance From 20% to 90% battery charge: 34 minutes From 0% to 100% battery charge: 45 minutes The time taken to cool down to a rechargeable temperature is ≤8 minutes (After the drone lands in a normal temperature environment)
battery swapping time
operating range
working environment
modular design
charging efficiency
Shell appearance
Size
Size ≤ 1.6m x 1.6m x 1.6m (closed state) ≤3.3m*2.8m*1.6m (in open state) (The above data does not include the height of the foot cup, which is 102mm, and the height of the weather station, which is 230mm.)
weight
≤800kg (in factory condition) Main frame: stainless steel Door body: aluminum
material
stainless steel
protection level, enclosure and key components, salt spray rating
IP55
service life of transmission components
96 hours
Electrical hardware specifications
Rapid deployment
Connect to power, connect to the network, deploy with one click AC 220V±10%, frequency 50Hz±2% Monitor within the nest Supports power-off protection, with standby power supply endurance time ≥2.5 hours Monitor battery temperature and cycle count in real-time, perform regular charging and discharging of the battery, and issue alerts based on the battery's health status Peak power ≤ 5500W
AC power supply
In-nest monitoring
Emergency power supply
Battery health monitoring
Power consumption
Communication function
Communication method
Support RJ45, OPGW, 4G, 5G
RTK module
Support
Environmental perception function
Wind speed
Support
environmental temperature and humidity
Support
barometric pressure
Support
rainfall sensing
Support
out-of-nest monitoring
Support
supplemental light
Support
Emergency Function
Out-of-control protection
Out-of-control warning, automatic return, hovering, and landing on the spot functions Equipped with automatic return-to-home function when drone battery is low Equipped with emergency landing and alternate landing point landing functions It has the function of returning to base normally after the municipal power supply is cut off It has the function of returning to the base normally after losing network connection
Low battery return
Emergency alternate landing
Off-grid protection function
Network disconnection protection function
Self-check function
Self-check
The machine nest has a self-checking function The machine nest features a one-click reset function
One-button Reset
Flight mission function
Flight route planning function
Settings can be made for takeoff and landing methods, flight speed, and waypoint information. For a single flight, the number of waypoints that can be set is no less than 300 It features remote manual, local manual control, and fully automatic modes, which can be switched between It has the function of remotely manually controlling the drone's flight and hovering It possesses the capability to remotely control the drone's gimbal for zooming, taking photos, recording videos, and other functions Equipped with a one-click return function, upon manually activating this function, the current task will be aborted and the vehicle will return In case of communication interruption, a backend alert will be pushed. It supports continuing the task or automatically returning to the home base after the communication is restored During route planning, issue warnings for routes that exceed the limit range and restrict task execution During flight, when the battery voltage falls below the preset alarm voltage, the system will trigger an alarm and support automatic termination of the current task, allowing for either a return flight along the original path or a straight-line return flight During the inspection process, if the drone interrupts the task due to abnormal conditions and returns, it can take off again and continue the inspection task from the breakpoint Intelligently determine whether the takeoff battery level meets the flight requirements based on the length of the route Support
Control mode switching
Support
Remote control of drone
Remote control of drone gimbal
One-click return to home
Return to home in case of communication interruption
Restricted flight within designated areas
Low voltage
Other functions
Remote upgrade
Equipped with remote firmware upgrade function Product fault codes, error code output, and guidance
log management
airplane
Compatible Models
Compatible with DJI Matrice 400 series aircraft, and designed to retain the feasibility of adapting to similar future models
Compatible Models
Compatible with all official mounts for DJI Matrice 400 drone